Deep Pour High Flow Epoxy Grout is a high flow version of our Deep Pour Epoxy Grout, designed for grouting and anchoring equipment in thicknesses of up to 12 inches. This product features enhanced flowability for grouting over large distances and in tight clearance. This three component epoxy grout eliminates costly failures due to curing cracks, expansion, corrosion and oil degradation. Deep Pour Epoxy Grout High Flow features excellent resistance to a broad range of chemical and abrasive conditions, and resistance to vibration, torque loads, high impact and other stresses to provide outstanding load bearing stability. This material is U.S.D.A. approved for incidental food contact.
Filter by Category:
Filter by Market:
Thin Pour Epoxy Grout
Thin Pour Epoxy Grout is a high strength industrial epoxy grout designed for grouting, re-grouting and anchoring equipment. Our two component Thin Pour Epoxy has superior flow rates for easy grouting under machine bases or sole plates. Excellent resistance to a broad range of chemical conditions and resistance to abrasion, vibration and impact enhance machine operation. Minimal surface preparation and quick and easy installation eliminate costly downtime. Quick setting and special curing features allow operation in as little as 6 hours after installation. Thin Pour Epoxy is U.S.D.A. approved for incidental food contact.
Precision Grout
Precision Grout is a cement-based precision non-shrink, non-metallic, non-staining industrial grout for supporting equipment and machinery, as well as other industrial applications. Precision Grout meets the requirements of ASTM C-1107 when applied in temperatures ranging from 41 F-86 F. This product contains no metallic aggregates, accelerators, chlorides or oxidizing catalysts.
Liquid Flow Epoxy Grout
Liquid Flow Epoxy Grout is a high strength, fast setting epoxy material used for grouting, regrouting and anchoring equipment, and designed for maximum flowability. Liquid Flow Epoxy features an extremely low viscosity for superior flow, leveling and air release. Strong vibration and impact resistance plus superior chemical resistance to most industrial chemicals make this grout a superior choice for applications covering long distances or tight clearances.
High Performance Grout
High Performance Grout is a flowable, high-strength precision non-shrink, non-metallic industrial grout for supporting equipment and machinery, as well as other industrial applications. High Performance Grout meets the requirements of ASTM C-1107 when applied in temperatures ranging from 40 F-90 F. High Performance Grout is designed for applications requiring high strength and high flowability. This product contains no metallic aggregates, accelerators, chlorides or oxidizing catalysts.
Deep Pour FS Epoxy Grout
Deep Pour FS Epoxy Grout is a fast setting version of Stratarock Deep Pour Epoxy Grout, an industrial epoxy grout designed for grouting and anchoring heavy equipment in thicknesses of up to 12 inches. Superior to cementitious grouts, our three component Deep Pour FS Epoxy Grout eliminates costly failures due to curing cracks, expansion, corrosion and oil degradation. Our superior formulation insures excellent resistance to a broad range of chemical and abrasive conditions, and resistance to vibration, torque loads, high impact and other stresses to provide outstanding load bearing stability. U.S.D.A. approved for incidental food contact.
Deep Pour Epoxy Grout
Deep Pour Epoxy Grout is a high strength industrial epoxy grout designed for grouting and anchoring in thicknesses of up to 12 inches. This three component epoxy grout eliminates costly failures due to curing cracks, expansion, corrosion and oil degradation. Deep Pour Epoxy Grout features negligible shrinkage, excellent resistance to a broad range of chemical and abrasive conditions, vibration, torque loads, high impact and other stresses to provide outstanding load bearing stability. Deep Pour Epoxy Grout complements our Thin Pour and Liquid Flow Epoxies which can be used when access under the base is one inch or less.
Crusher Backing Grout
Crusher Backing Grout is a 100% solids epoxy resin compound formulated for backing wear metal in all types of crushers, grinding mills and other heavy machinery used in mining and crushed aggregate operations. This material combines high impact resistance, superior compressive strength, non-flammable qualities, high stability and low shrinkage all in one system. Our Crusher Backing Grout offers excellent resistance to water, oil and chemicals that may be introduced during crushing and milling operations.
Construction Grout
Construction Grout is a non-shrink, non-corrosive, non-staining industrial grout that is compatible in appearance with ordinary concrete. This product is formulated for high strength and flowability, and contains no metallic aggregates, accelerators, chlorides or oxidizing catalysts. Construction Grout is a versatile product, designed for a wide variety of industrial uses.