Deep Pour High Flow Epoxy Grout is a high flow version of our Deep Pour Epoxy Grout, designed for grouting and anchoring equipment in thicknesses of up to 12 inches. This product features enhanced flowability for grouting over large distances and in tight clearance. This three component epoxy grout eliminates costly failures due to curing cracks, expansion, corrosion and oil degradation. Deep Pour Epoxy Grout High Flow features excellent resistance to a broad range of chemical and abrasive conditions, and resistance to vibration, torque loads, high impact and other stresses to provide outstanding load bearing stability. This material is U.S.D.A. approved for incidental food contact.
Read More
Vinyl Ester Polymer Concrete combines advanced filler technology and Vinyl Ester resins to create a polymer concrete with outstanding chemical resistance and physical properties. This material conquers the toughest chemical environments while eliminating many of the problems traditionally associated with vinyl ester materials.
Read More
Vinyl Ester Coating High Temp is a high performance vinyl ester based resin which is applied in aggregate filled layers to provide a dense, non-porous finish. This material is easy to install, provides excellent chemical resistance and performs well in a wide temperature range. Vinyl Ester Coating High Temp provides outstanding resistance to oils, fats, water and corrosive liquids. Specially selected aggregates provide exceptional physical strengths, as well as resistance to abrasion, scratching, scuffing, staining, denting, bacteria and fungus. Vinyl Ester Coating High Temp needs no waxing and is lightweight and easily installed. U.S.D.A. approved for incidental food contact.
Read More
Thin Pour Epoxy Grout is a high strength industrial epoxy grout designed for grouting, re-grouting and anchoring equipment. Our two component Thin Pour Epoxy has superior flow rates for easy grouting under machine bases or sole plates. Excellent resistance to a broad range of chemical conditions and resistance to abrasion, vibration and impact enhance machine operation. Minimal surface preparation and quick and easy installation eliminate costly downtime. Quick setting and special curing features allow operation in as little as 6 hours after installation. Thin Pour Epoxy is U.S.D.A. approved for incidental food contact.
Read More
Precision Grout is a cement-based precision non-shrink, non-metallic, non-staining industrial grout for supporting equipment and machinery, as well as other industrial applications. Precision Grout meets the requirements of ASTM C-1107 when applied in temperatures ranging from 41 F-86 F. This product contains no metallic aggregates, accelerators, chlorides or oxidizing catalysts.
Read More
Novolac Polymer Concrete is a high strength, chemical resistant industrial Novolac epoxy material designed for the repair and replacement of concrete foundations exposed to harsh process chemicals. This is an especially good option where exposure to sulfuric acid is expected. Our three component epoxy Novolac Polymer Concrete is also effective when anchoring precision equipment to eliminate costly failures due to trauma degradation, chemical breakdown, oil saturation, freeze/thaw conditions and other stresses. This product is U.S.D.A. approved for incidental food contact.
Read More
Novolac Coating is a 100% solids epoxy Novolac coating designed for application in extremely corrosive environments. It may be used as either a topcoat for trowel or slurry floors or as a stand-alone coating. When used as a topcoat, Novolac Coating improves the chemical and abrasion resistance of flooring systems while making the floor easier to clean. As a coating for old or new concrete it offers outstanding protection from a wide variety of industrial chemicals including concentrated sulfuric acid.
Read More
Liquid Flow Epoxy Grout is a high strength, fast setting epoxy material used for grouting, regrouting and anchoring equipment, and designed for maximum flowability. Liquid Flow Epoxy features an extremely low viscosity for superior flow, leveling and air release. Strong vibration and impact resistance plus superior chemical resistance to most industrial chemicals make this grout a superior choice for applications covering long distances or tight clearances.
Read More
High Performance Grout is a flowable, high-strength precision non-shrink, non-metallic industrial grout for supporting equipment and machinery, as well as other industrial applications. High Performance Grout meets the requirements of ASTM C-1107 when applied in temperatures ranging from 40 F-90 F. High Performance Grout is designed for applications requiring high strength and high flowability. This product contains no metallic aggregates, accelerators, chlorides or oxidizing catalysts.
Read More
Fiber Reinforced Polymer Concrete VO is a two component, specially formulated prepackagedblend of Portland cement, aggregates, microsilica, fibers and other unique chemicals used to repair deteriorated concrete. This material is ideal for use where a fast setting time and high strength are desired and is specially designed for the repair of deteriorated concrete and can be used above or below grade and on vertical or overhead surfaces. Fiber Reinforced Polymer Concrete VO (FRPC VO) is easy to use. Simply add the premeasured FRPC Additive and mix.
Read More
Fiber Reinforced Polymer Concrete CH is a two component, specially formulated prepackagedblend of Portland cement, aggregates, microsilica, fibers and other unique chemicals. Microsilica reacts chemically with the calcium hydroxide in the cement paste to produce a calcium silicate hydrate gel which yields a substantially improved in-place concrete. This material is ideal for use where a fast setting time and high strength are desired and can be used above or below grade. Fiber Reinforced Polymer Concrete CH (FRPC CH) is easy to use. Simply add the premeasured FRPC Additive and mix.
Read More
Epoxy Sealer is a l00% solids epoxy coating is designed for application in corrosive environments. This product may be used as either a topcoat or a sealer. When used as a topcoat, this two-component epoxy enhances the chemical and abrasion resistant properties of concrete. Epoxy Sealer offers superior protection for new and old surfaces when applied as a concrete sealer. Epoxy Sealer is U.S.D.A. approved for incidental food contact. Available in thickened version for vertical applications.
Read More
Epoxy Primer WB is a multipurpose waterborne primer and sealer, based upon a unique chemistry that aids the application of other products, including resurfacers, liners, and coatings to green concrete. Epoxy Primer WB is applied to eliminate the conventional 28 day cure time by deeply penetrating into the pores of the fresh concrete surfaces and bonding securely to the concrete as well as the overlayment. This primer/sealer provides substantial savings in both cost and downtime. Epoxy Primer WB is an ideal substitute for curing compounds, hardeners or sealants for new concrete because it prevents the rapid dehydration of new concrete and eliminates concrete dusting, resulting in a better cure and higher concrete strengths.
Read More
Epoxy Primer SF is a solvent free, moisture tolerant two component epoxy primer and sealer. This 100% solids product has excellent adhesion as a primer for other Stratarock products. The broad application temperature range of this material (50oF-80oF) and its tolerance for moisture makes it an excellent choice for a wide range of applications, including damp substrates.
Read More
Deep Pour FS Epoxy Grout is a fast setting version of Stratarock Deep Pour Epoxy Grout, an industrial epoxy grout designed for grouting and anchoring heavy equipment in thicknesses of up to 12 inches. Superior to cementitious grouts, our three component Deep Pour FS Epoxy Grout eliminates costly failures due to curing cracks, expansion, corrosion and oil degradation. Our superior formulation insures excellent resistance to a broad range of chemical and abrasive conditions, and resistance to vibration, torque loads, high impact and other stresses to provide outstanding load bearing stability. U.S.D.A. approved for incidental food contact.
Read More
Deep Pour Epoxy Grout is a high strength industrial epoxy grout designed for grouting and anchoring in thicknesses of up to 12 inches. This three component epoxy grout eliminates costly failures due to curing cracks, expansion, corrosion and oil degradation. Deep Pour Epoxy Grout features negligible shrinkage, excellent resistance to a broad range of chemical and abrasive conditions, vibration, torque loads, high impact and other stresses to provide outstanding load bearing stability. Deep Pour Epoxy Grout complements our Thin Pour and Liquid Flow Epoxies which can be used when access under the base is one inch or less.
Read More
Crusher Backing Grout is a 100% solids epoxy resin compound formulated for backing wear metal in all types of crushers, grinding mills and other heavy machinery used in mining and crushed aggregate operations. This material combines high impact resistance, superior compressive strength, non-flammable qualities, high stability and low shrinkage all in one system. Our Crusher Backing Grout offers excellent resistance to water, oil and chemicals that may be introduced during crushing and milling operations.
Read More
Construction Grout is a non-shrink, non-corrosive, non-staining industrial grout that is compatible in appearance with ordinary concrete. This product is formulated for high strength and flowability, and contains no metallic aggregates, accelerators, chlorides or oxidizing catalysts. Construction Grout is a versatile product, designed for a wide variety of industrial uses.
Read More
Epoxy Primer FX is a two component, 100% solids epoxy resin based product designed as a flexible primer or binder for concrete, steel and other substrates. It is intended for use in areas where thermal or mechanical shock and minor substrate movement is expected. Epoxy Primer FX will penetrate and seal small cracks and function as a membrane under additional coatings or flooring materials.
Read More
